A system running but not cooling almost always comes down to charge, airflow, or a failing component — we test all three.
A tech who explains superheat and subcooling readings instead of just saying 'it's low on freon'.
A system that's technically running but not actually cooling the house is one of the most misdiagnosed hvac complaints there is, which is exactly why ac repair calls in Kimberly, ID get treated with urgency, not a next-available-Tuesday slot.

Waiting rarely saves money and often turns a same-day repair into a longer, more involved job.
AAA Pro HVAC built its AC repair process around one idea: diagnose first, quote honestly, fix it right.
We're licensed, insured, and staffed with techs who've spent years specifically on AC repair, not general handyman work with an HVAC certificate bolted on.

Every tech carries EPA Section 608 certification, required for legally handling refrigerant.
Trucks stocked and staged across Kimberly, ID mean shorter windows than a call-center dispatch model.
The number on your quote is the number on your invoice.
We check superheat and subcooling against manufacturer spec before touching the refrigerant charge.
Every job starts with a real diagnosis, not a guess — here's the full scope of what our AC repair technicians handle across Kimberly, ID.
Low charge is a symptom, not a diagnosis — we find the leak with electronic detection and UV dye before recharging. This is one of the most requested AC repair calls we get across Kimberly, ID.
We test motor amperage against rated draw before replacing. Techs handling condenser fan motor repair carry the specific parts and tools this job calls for, not a generic kit.
A dirty or frosted evaporator coil restricts airflow and drops cooling capacity fast. This is one of the most requested AC repair calls we get across Kimberly, ID.
Hard-starting, humming-but-not-spinning, or tripped breaker symptoms get tested with a start capacitor check before any compressor is condemned. Techs handling compressor diagnostics carry the specific parts and tools this job calls for, not a generic kit.
A miscalibrated or miswired thermostat can mimic a full system failure. Techs handling thermostat calibration & wiring carry the specific parts and tools this job calls for, not a generic kit.
Error codes on the wall unit display get cross-referenced against the manufacturer's chart. Techs handling ductless mini-split diagnostics carry the specific parts and tools this job calls for, not a generic kit.

Tell us whether the air is warm, the unit is icing, or it's not running at all — that detail changes what parts ride along.
Techs arrive with manifold gauges and common capacitor/contactor stock already loaded.
You see the flat-rate number before approval, tied to the confirmed diagnosis.
Workmanship is backed in writing on your invoice.

Turned out to be a slow leak at the schrader valve — they found it with dye, fixed it, and recharged properly.
Outdoor unit had ice forming on the copper line which I'd never seen before.
Condenser fan had completely stopped and the compressor was still trying to run.
Mini-split in the sunroom was throwing a code I couldn't find online.

Usually low refrigerant charge from an undetected leak, a dirty evaporator coil, or restricted airflow from a clogged filter.
Ice almost always means something is restricting airflow or refrigerant flow, and running it iced up can damage the compressor.
Every system has a manufacturer-specified charge amount — we don't top off blind, we charge to spec using superheat/subcooling readings.
We carry recovery equipment rated for legacy refrigerants.
Mini-splits have their own fault-code language, and our techs are trained on the major brands.
We prioritize no-cool calls with vulnerable occupants when scheduling.

Our AC repair crews are positioned throughout Kimberly, ID to keep response times realistic, not just promised.
☎ Call +1-866-805-8548 for Kimberly Service